Use, Maintenance, And Installation Of Filling Machines
The standardized and correct use of filling machines can extend their service life and effectively protect the safety of personnel and machines. Let me explain to you the precautions for the use, maintenance, and installation of filling machines. I hope it can be helpful to everyone.
1. Because this filling machine is an automated machine, the size of the easy to pull bottle, bottle mat, and bottle cap must be unified.
2. Before driving, you must first use the joystick to rotate the machine and check if there are any abnormalities in its rotation. If it is confirmed to be normal, you can then drive.
3. When adjusting the machine, tools should be used appropriately. It is strictly prohibited to use too large tools or force too hard to disassemble parts to avoid damaging the machine or affecting its performance.
4. Every time the machine is adjusted, be sure to tighten the loosened screws and use the joystick to rotate the machine to check if its movements meet the requirements before driving.
5. The machine must be kept clean, and it is strictly prohibited to have oil stains, chemicals, or glass debris on the machine to prevent damage and corrosion. Therefore, it is necessary to:
During the production process, the machine should promptly remove the medicine or glass debris.
Before shift handover, each part of the machine surface should be cleaned once, and clean lubricating oil should be added to each activity department.
⑶ It should be thoroughly cleaned once a week, especially in areas that are difficult to clean during normal use, or blown clean with compressed air.